Jiheon Jun R&D Staff, Aqueous and low Temp corrosion Contact 865.241.3521 | JUNJ@ORNL.GOV All Publications Chemical interaction and compatibility of uranium mononitride and alumina forming austenitic stainless steel Corrosion Evaluation of Al-Cu-Mn-Zr Cast Alloys in 3.5% NaCl Solution Investigation of Chemical Species in the Corrosion Barrier Layer on Thermal CO2 Treated AZ91D Magnesium Alloy with Lithium Nitrate Evaluation of liquid metal embrittlement of F82H and 4340 steels in liquid lithium Electrochemically Assisted Single Crystal Growth of Reduced Preyssler Polyoxometalates Decorated with M2+ (M = Co, Ni) and Cubane–Like Ni4O4 Units Advanced neutron absorber Ni-Cr-Mo-Gd alloys seawater corrosion mechanism and susceptibility study... Lithium nitrate salt-assisted CO2 absorption for the formation of corrosion barrier layer on AZ91D magnesium alloy Performance Restoration of Iron Electrodes by Polarity Reversal after Long-Term Surface Fouling in Wastewater Electrocoagulat... Liquid metal compatibility of pre-oxidized FeCrAl in flowing Sn Open-air plasma-assisted deposition of organosilicon coating for corrosion protection of AZ91D Mg alloy... Characterization and Electrochemical Analysis of Acidic Condensate-Induced Corrosion on Aluminized Coating on Steel in Residential Heaters An effective air–liquid contactor for CO2 direct air capture using aqueous solvents Atmospheric Pressure Plasma Treatment of Magnesium Alloy for Enhanced Coating Adhesion and Corrosion Resistance Galvanic corrosion of AZ31B joined to dual-phase steel with and without Zn layer by ultrasonic and friction stir welding Performance of Structural Alloys in Bio-oil Production, Upgrading, and Storage Systems Formation of carbon and oxygen rich surface layer on high purity magnesium by atmospheric carbon dioxide plasma Corrosion Compatibility of Stainless Steels and Nickel in Pyrolysis Biomass-Derived Oil at Elevated Storage Temperatures... Mechanical Joint Performances of Friction Self-piercing Riveted Carbon Fiber Reinforced Polymer and AZ31B Mg Alloy Effect of Carboxylic Acids on Corrosion of Type 410 Stainless Steel in Pyrolysis Bio-Oil Compatibility of Fuel System Elastomers and Plastics with a Fast-Pyrolysis Oil (Bio-oil) at Room Temperature... Electrochemical Corrosion Analysis of Stainless Steels in LALM Pyrolysis Bio-Oil with Organic Corrodents Compatibility of Alumina-Forming Austenitic Steels in Static and Flowing Pb Corrosion Prevention of Additively Manufactured Aluminum Packing Devices Developed for Process Intensification of CO 2 Capture by Aqueous Amines Laser-Interference Surface Preparation for Enhanced Coating Adhesion and Adhesive Joining of Multi-Materials Compatibility of FeCrAlMo in Flowing Pb-Li at 600°C to 700°C Pagination Current page 1 Page 2 Page 3 Next page ›â¶Äº Last page Last » Key Links Organizations Physical Sciences Directorate Materials Science and Technology Division Materials Structure and Processing Science Section Surface Engineering and Tribology
